Transition square 90 32-25 MM

Details

Transition corner

The polypropylene transition corner 32x25 mm is used to change the direction of polypropylene pipes of equal diameter by an angle of 90 degrees with the simultaneous installation of a transition node on a pipe of a different diameter. The transition square of 32x25 mm is convenient for welding when it is necessary to switch to a pipe with a different diameter, using such a square you can do without an additional coupling.

The transition square is a universal part and is suitable for welding all types of pipes, whether reinforced or not reinforced. They are welded to pipes using a soldering iron for polypropylene pipes.

Technical characteristics of the transition square 32x25:
Maximum pressure — 25 atm;
Maximum operating temperature — 95oC;
Size — 32x25 mm;
Angle of rotation — 90 gr;
Color — white;

Welding time:
For a diameter of 25 mm:

Heating time — 7 sec.;
Connection time — 4 sec.;
Cooling time — 3 min.;
Weld length — 18 mm;
For a diameter of 32 mm:

Heating time — 8 sec.;
Connection time — 6 sec.;
Cooling time — 4 min.;
Weld length — 20 mm;