Collector group Stainless steel with built-in rasx. assembled 1"x9".

Details

The collector block made of stainless steel is used to distribute flows along the contours of underfloor heating, radiator heating, and other climatic systems where water or non-freezing glycol solutions with a maximum operating temperature of 90 ° C and a working pressure of up to 9 bar are used as a coolant.
The outputs of the return collector of the unit are equipped with thermostatic valves, the supply – tuning valves with flow meters (rotameters). Collectors are equipped with air vents with shut-off valves, drainage taps, self-sealing plugs. The material of the collectors is AISI 304 steel, fittings and fittings are CW617N brass, sealing rings and spool gaskets are EPDM 70Sh. The kit includes mounting brackets.
The nominal diameter of the collectors is 1". The thread of the outputs is external, 3/4". The connection of the circulation loops is carried out using fittings of the Euroconus standard.

The composition of the collector unit:

Stainless steel feed manifold;
Stainless steel return manifold;
Tuning valve with flow meter (3-10 pcs);
Galvanized steel bracket (2 pcs);
Control valve with cap for servo drive M30*1.5(3-10 pcs).

Nominal pressure, MPa: 6.0

Maximum temperature of the working environment, °C: 70

Conditional flow capacity of the control valve, Kvs: 2.5

The maximum temperature of the air surrounding the node, ° C: 50

Valve servo thread: M30x1.5

Maximum allowable pressure drop on the control
valve, MPa: 1.0

Average full service life: 25 years