Latex facade paint Dulux Bindo Facade deep matte base-BC 2,25 l

Details

Dulux Professional Bindo Facade (Dulux Bindo Facade) concrete paint for outdoor work

Bindo paints represent a high professional level of finishing: quality, convenience and speed. The increased content of white pigment increases the hiding power and reduces consumption.

The service life of the coating is up to 20 years.

Deep-matt water-dispersion paint for high-quality finishing of mineral facade surfaces and plinths.

Prevents the appearance of salt on the painted surface.

Reliably protects the surface from moisture penetration and at the same time passes steam from the inside, allowing the coating to "breathe".

Forms an absolutely matte surface, resistant to precipitation and pollution.

Provides reliable protection against the appearance of mold and algae.

Thixotropic: applied without splashes and streaks, easily leveled.

It has a neutral smell.

Scope of application:

For outdoor work.
Suitable for application on completely dried mineral surfaces (concrete, plaster, brick, masonry).
Ideal for plinths.
It is recommended for painting facades of residential and public buildings in any climatic zones.
Base: BW (white) and BC (colorless - tinting in saturated colors).

Tinting: according to the Acomix system.

Gloss level: Deep matte.

Density: ≈1.5 kg/l.

Dry residue: ≈60%.

Water permeability: 0.25 kg/(m2·h½), Class 2.

Vapor permeability: 185.5 g/(m2·day), Grade 1.

Unique components: Additives against mold and algae.

Binder: Copolymer dispersion.

Application Features:

Mix thoroughly before use.
To strengthen the base surface, increase adhesion and reduce paint consumption, prime the prepared surface with a primer.
Apply in two layers at air and surface temperatures from +5 ° C to +30 ° C and air humidity from 40% to 80%.
The specified level of weather resistance of the coating reaches 10-12 days after application.
When painting textured coatings, decorative plasters, apply paint in thin layers.
Dilution: For all layers - no more than 1 part of water per 10 parts of paint.

Diluent: Water.

Method of application: Brush, roller, spray.

Spraying:

Conventional spraying: dilute in a ratio of no more than 1 part of water to 5 parts of paint - suitable for most equipment.
Airless spraying: dilution with water is not required. If necessary, add up to 10% water. The recommended operating pressure is from 100 to 150 bar, the spray angle of the torch is 30-50°, the nozzle diameter is 0.012-0.017 inches.
Drying time:

The time before applying the next layer is 1-2 hours.
The time of complete drying is 4 hours.
With a decrease in temperature and an increase in relative humidity, the drying time may increase.
Expenditure:

Up to 14 m2/l in 1 layer.
The actual consumption depends on the absorbent properties of the surface.
Care of the painted surface: If necessary, the coating should be cleaned no earlier than a month
after painting, by rinsing with water under pressure without the use of detergents.