Facade water dispersion paint Dufa Retail Fassadenfarbe RD90 matt white 10 l

Details

Purpose and scope of application: Facade matte acrylic latex paint, designed to create weather-resistant facade coatings.

Suitable for most surfaces (concrete, plaster, brick, etc.).

Designed to protect against atmospheric influences, create an expressive architectural form, as well as for any interior work in conditions of high humidity.

Properties- high-explosive;- alkali-resistant;- has resistance to aggressive environment in industrial cities;- with a light filling effect;- Excellent vapor permeability and water resistance.

Wet abrasion class Wet abrasion: Class 2 according to DIN EN 1062.
The color—white composition of the base "A" is tinted in pastel tones

The degree of gloss is matte

Density 1.6 g/cm3
The flow rate is 10 m2/l in one layer on a smooth surface.
To accurately determine the paint consumption, it is recommended to perform a test painting on the object.
Composition of synthetic polymer dispersion, fillers, calcium carbonate, titanium dioxide, preservative, water, target additives.

Preparation of the substrate The surface must be dry and clean.
Plastered bases should be dried for 4 weeks.
Dry the plastered places well for a second time.
Prime the düfa Tiefgrund LF.
Old unpainted foundations made of plaster, heavy concrete, fibrous cement, limestone and building bricks: remove dust, dirt and grease with water with the addition of detergent or powder with a hard brush.
Prime the düfa Tiefgrund LF after the base has completely dried.
Dispersion paints capable of carrying a load: clean, pre-treat old latex coatings and wash with clean water.
Dispersion paints that cannot bear the load: remove without residue.
Primed with düfa Tiefgrund LF.
Mold-damaged bases: clean and pre-treat with a mold remover.

Application by brush, roller, airless spray.

When applying with a spray gun, dilute the paint with water to the desired consistency (no more than 10%).
Monitor the uniform application and distribution of paint on the surface to obtain the required layer.

The recommended number of layers is 2.

The application temperature is + 5 °C, max. + 35 °C for the object, material and air.

Cleaning of working tools At the end of painting work, the tool is washed with water or soap solution.